View D96938-001US_8314561.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

j uly 2007 order number: D96938-001US the intel ? desktop board dq35mp may contain design defects or errors known as errata that may cause the product to deviate from published specifications. current characterized errata are documented in the in tel desktop board dq35mp specification update. intel? desktop board dq35mp technical product specification
revision history revision revision history date -001 initial release of the intel ? desktop board dq35mp technical product specification. july 2007 this product specification applies to only the standard intel ? desktop board dq35mp with bios identifier joq3510j.86a. changes to this specification will be published in the intel desktop board dq35mp specification update before being incorporated into a revision of this document. information in this document is pr ovided in connection with intel ? products. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document. ex cept as provided in intel?s te rms and conditions of sale for such products, intel assumes no liability what soever, and intel disclaims any express or implied warranty, relating to sale and/or us e of intel products in cluding liability or warranties relating to fitness for a particul ar purpose, merchantabi lity, or infringement of any patent, copyright or other intellectual property right. in tel products are not intended for use in medical, life saving, or life sustaining applications. intel corporation may have patents or pending pate nt applications, trademar ks, copyrights, or other intellectual property rights that relate to the presen ted subject matter. the furnishing of documents and other materials and information does not provide any license, express or implied, by estoppel or otherwise, to any such patents, trademarks, copyrights, or other intellectual property rights. intel may make changes to specifications and pr oduct descriptions at any time, without notice. designers must not rely on the absence or characteristi cs of any features or instru ctions marked ?reserved? or ?undefined.? intel reserves these for future definition and shall have no responsibility whatsoever for conflicts or incompatibilities arising from future changes to them. intel ? desktop boards may contain design defects or errors known as errata, which may cause the product to deviate from published specifications. current ch aracterized errata are available on request. contact your local intel sales office or your distributor to obtain the latest specifications before placing your product order. copies of documents which have an ordering number and are referenced in this document, or other intel literature, may be obtained from: intel corporation p.o. box 5937 denver, co 80217-9808 or call in north america 1-800-548-4725, europe 44-0-1793-431-155, france 44-0-1793-421-777, germany 44-0-1793-421-333, other countries 708-296-9333. intel, the intel logo, core, and celeron are registered trademarks of intel corporation or its subsidiaries in the united states and other countries. * other names and brands may be clai med as the property of others. copyright ? 2007, intel corporation. all rights reserved.
iii preface this technical product specification (tps) specifies the board layout, components, connectors, power and environmental requirements, and the bios for the intel ? desktop board dq35mp. it describes the standard product and available manufacturing options. intended audience the tps is intended to provide detailed, technical information about the desktop board dq35mp and its components to the vendors, system integrators, and other engineers and technicians who need this level of information. it is specifically not intended for general audiences. what this document contains chapter description 1 a description of the hardware used on the board 2 a map of the resources of the board 3 the features supported by the bios setup program 4 a description of the bios error me ssages, beep codes, and post codes 5 regulatory compliance and battery disposal information typographical conventions this section contains information about the conventions used in this specification. not all of these symbols and abbreviations appear in all specifications of this type. notes, cautions, and warnings note notes call attention to important information. # integrator?s notes integrator?s notes are used to call attentio n to information that may be useful to system integrators. caution cautions are included to help you avoid damaging hardware or losing data.
intel desktop board dq35mp technical product specification iv other common notation # used after a signal name to identify an active-low signal (such as usbp0#) gb gigabyte (1,073,741,824 bytes) gb/sec gigabytes per second gbit gigabit (1,073,741,824 bits) kb kilobyte (1024 bytes) kbit kilobit (1024 bits) kbits/sec 1000 bits per second mb megabyte (1,048,576 bytes) mb/sec megabytes per second mbit megabit (1,048,576 bits) mbit/sec megabits per second xxh an address or data value ending with a lowercase h indicates a hexadecimal value. x.x v volts. voltages are dc unless otherwise specified. * this symbol is used to indicate third-party brands and names that are the property of their respective owners.
v contents 1 product description 1.1 overview........................................................................................ 10 1.1.1 feature summary ................................................................ 10 1.1.2 board layout ....................................................................... 12 1.1.3 block diagram ..................................................................... 14 1.2 legacy considerations............. ......................................................... 15 1.3 online support................................................................................ 15 1.4 processor ....................................................................................... 15 1.5 system memory .............................................................................. 16 1.5.1 memory configurations ......... ................................................ 17 1.6 intel ? q35 express chipset ............................................................... 19 1.6.1 intel q35 graphics subsystem ............................................... 19 1.6.2 usb ................................................................................... 21 1.6.3 serial ata interfaces ............................................................ 21 1.7 parallel ide controller ...................................................................... 22 1.8 real-time clock subsystem ............ .................................................. 23 1.9 legacy i/o controller ....................................................................... 23 1.9.1 serial port ........................................................................... 23 1.10 audio subsystem............................................................................. 24 1.10.1 audio subsystem software .................................................... 25 1.10.2 audio connectors and headers ............................................... 25 1.11 lan subsystem ............................................................................... 26 1.11.1 intel ? 82566dm-2 gigabit ethernet controller .......................... 26 1.11.2 lan subsystem software....................................................... 26 1.11.3 rj-45 lan connector with integrated leds .............................. 27 1.12 intel ? active management technology (intel ? amt) ............................. 28 1.12.1 intel amt features ............................................................... 28 1.12.2 intel amt software and drivers .............................................. 29 1.13 hardware management subsystem .................................................... 30 1.13.1 hardware monitoring and fan control...................................... 30 1.13.2 fan monitoring ..................................................................... 30 1.13.3 chassis intrusion and detection.............................................. 30 1.13.4 thermal monitoring .............................................................. 31 1.14 power management ......................................................................... 32 1.14.1 acpi................................................................................... 32 1.14.2 hardware support ................................................................ 34 1.15 trusted platform module (tpm)..... ..................................................... 38 2 technical reference 2.1 memory map................................................................................... 39 2.1.1 addressable memory............................................................. 39 2.2 connectors and headers................................................................... 41 2.2.1 back panel connectors .......................................................... 42
intel desktop board dq35mp technical product specification vi 2.2.2 component-side connectors and headers ................................ 43 2.3 jumper block .................................................................................. 51 2.4 mechanical considerations ........... ..................................................... 52 2.4.1 form factor......................................................................... 52 2.5 electrical considerations ........... ........................................................ 53 2.5.1 power supply considerations ................................................. 53 2.5.2 fan header current capability................................................ 53 2.5.3 add-in board considerations .. ................................................ 54 2.6 thermal considerations .................................................................... 54 2.7 reliability ....................................................................................... 56 2.8 environmental ................................................................................ 56 3 overview of bios features 3.1 introduction ................................................................................... 57 3.2 bios flash memory organization .. ..................................................... 58 3.3 resource configuration ............ ........................................................ 58 3.3.1 pci autoconfiguration ........................................................... 58 3.3.2 pci ide support................................................................... 59 3.4 system management bios (smbios)................................................. 59 3.5 legacy usb support ........................................................................ 60 3.6 bios updates ................................................................................. 61 3.6.1 language support ................................................................ 61 3.6.2 custom splash screen .......................................................... 61 3.7 bios recovery................................................................................ 62 3.8 boot options................................................................................... 62 3.8.1 cd-rom boot ...................................................................... 62 3.8.2 network boot....................................................................... 62 3.8.3 booting without attached devices........................................... 63 3.8.4 changing the default boot device during post ........................ 63 3.9 adjusting boot speed....................................................................... 63 3.9.1 peripheral selection and conf iguration..................................... 63 3.9.2 bios boot optimizations ....... ................................................ 64 3.10 bios security features .................................................................... 64 4 error messages and beep codes 4.1 speaker ......................................................................................... 67 4.2 bios beep codes ............................................................................ 67 4.3 bios error messages ....................................................................... 67 4.4 port 80h post codes ....................................................................... 68 5 regulatory compliance and battery disposal information 5.1 regulatory compliance..................................................................... 73 5.1.1 safety standards.................................................................. 73 5.1.2 european union declaration of conformity statement ................ 74 5.1.3 product ecology statements................................................... 75
contents vii 5.1.4 emc regulations .................................................................. 79 5.1.5 product certification markings (b oard level)............................. 80 5.2 battery disposal information........ ..................................................... 81 figures 1. major board components.................................................................. 12 2. block diagram ................................................................................ 14 3. memory channel and dimm configuration ........................................... 18 4. back panel audio connector options .................................................. 25 5. lan connector led locations ............................................................ 27 6. thermal sensors and fan headers ..................................................... 31 7. location of the intel amt status indicator led..................................... 37 8. location of the standby power indicator led ....................................... 38 9. detailed system memory address map ............................................... 40 10. back panel connectors ..................................................................... 42 11. component-side connectors and headers ........................................... 43 12. connection diagram for front panel header ........................................ 48 13. connection diagram for front panel usb headers ................................ 50 14. location of the jumper block............................................................. 51 15. board dimensions ........................................................................... 52 16. localized high temperature zones..................................................... 55 tables 1. feature summary............................................................................ 10 2. board components shown in figure 1 ................................................ 13 3. supported memory configurations ... .................................................. 17 4. audio jack retasking support ........................................................... 24 5. lan connector led states ................................................................ 27 6. effects of pressing the power swit ch .................................................. 32 7. power states and targeted system power........................................... 33 8. wake-up devices and events ............................................................ 34 9. intel amt states.............................................................................. 36 10. system memory map ....................................................................... 41 11. component-side connectors and headers shown in figure 11................ 44 12. hd audio link header ...................................................................... 45 13. front panel audio header ................................................................. 45 14. serial ata connectors ...................................................................... 45 15. serial port header ........................................................................... 45 16. chassis intrusion header .................................................................. 46 17. front and rear chassis (3-pin) fan headers ........................................ 46 18. processor (4-pin) fan header ............................................................ 46 19. auxiliary front panel power/sleep led header..................................... 47 20. processor core power connector...... .................................................. 47 21. main power connector...................................................................... 47 22. front panel header .......................................................................... 48
intel desktop board dq35mp technical product specification viii 23. states for a one-color power led ...................................................... 49 24. states for a two-color power led...................................................... 49 25. bios setup configuration jumper settings.......................................... 51 26. recommended power supply current values ....................................... 53 27. fan header current capability........................................................... 53 28. thermal considerations for compon ents ............................................. 55 29. desktop board dq35mp environmental specifications ........................... 56 30. bios setup program menu bar.......................................................... 58 31. bios setup program function keys.................................................... 58 32. acceptable drives/media types for bios recovery ............................... 62 33. boot device menu options ................................................................ 63 34. supervisor and user password functions............................................. 65 35. beep codes .................................................................................... 67 36. bios error messages ....................................................................... 67 37. port 80h post code ranges.............................................................. 68 38. port 80h post codes ....................................................................... 69 39. typical port 80h post sequence........................................................ 72 40. safety regulations........................................................................... 73 41. lead-free board markings ................................................................ 78 42. emc regulations ............................................................................. 79 43. product certification markings ...... ..................................................... 80
9 1 product description what this chapter contains 1.1 overview........................................................................................ 10 1.2 legacy considerations............. ......................................................... 15 1.3 online support................................................................................ 15 1.4 processor ....................................................................................... 15 1.5 system memory .............................................................................. 16 1.6 intel ? q35 express chipset ............................................................... 19 1.7 parallel ide controller ...................................................................... 22 1.8 real-time clock subsystem ............ .................................................. 23 1.9 legacy i/o controller ....................................................................... 23 1.10 audio subsystem............................................................................. 24 1.11 lan subsystem ............................................................................... 26 1.12 intel ? active management technology (intel ? amt) ............................. 28 1.13 hardware management subsystem .................................................... 30 1.14 power management ......................................................................... 32 1.15 trusted platform module (tpm)..... ..................................................... 38
intel desktop board dq35mp technical product specification 10 1.1 overview 1.1.1 feature summary table 1 summarizes the major featur es of the desktop board dq35mp. table 1. feature summary form factor microatx (9.60 inches by 9.60 inches [ 243.84 millimeters by 243.84 millimeters]) processor support for the following: ? intel ? core?2 quad processor in an lga775 socket with a 1066 mhz system bus ? intel ? core?2 duo processor in an lga775 socket with a 1333 mhz, 1066 mhz, or 800 mhz system bus ? intel ? pentium ? dual-core processor in an lga775 socket with an 800 mhz system bus ? intel ? celeron ? processor 400 sequence in an lga775 socket with an 800 mhz system bus memory ? four 240-pin ddr2 sdram dual inline memory module (dimm) sockets ? support for ddr2 800 or ddr2 667 mhz dimms ? support for up to 8 gb of syst em memory using ddr2 800 or ddr2 667 dimms chipset intel ? q35 express chipset, consisting of: ? intel ? 82q35 graphics and memory controller hub (gmch) ? intel ? 82801ido i/o controller hub (ich9do) audio 4-channel (2+2) audio subsystem usin g the realtek* alc268-gr audio codec video intel ? graphics media accelerator 3100 graphics controller legacy i/o control legacy i/o co ntroller for serial port header peripheral interfaces ? 12 usb 2.0 ports ? six serial ata(3 gbps) interfaces, incl uding one red-colored external serial ata (esata) interface ? one parallel ata ide interface wi th udma 33, ata-66/100 support ? one serial port header (may require specialized chassis or cable for use) lan support gigabit (10/100/1000 mbits/sec) lan subsystem using the intel ? 82566dm-2 gigabit ethernet controller bios ? intel ? bios (resident in the spi flash device) ? support for advanced configuration and power interface (acpi), plug and play, and smbios continued
product description 11 table 1. feature summary (continued) instantly available pc technology ? support for pci* local bus specification revision 2.3 ? support for pci express* revision 1.0a ? suspend to ram support ? wake on pci, pci express, rs-232, front panel, usb ports, and lan expansion capabilities ? one pci express x16 bus add-in card connector ? two pci express x1 bus add-in card connectors ? one pci conventional bus connector hardware monitor subsystem ? intel ? quiet system technology intel ? qst) implemented through the intel ? management engine in ich9do ? voltage sense to detect out of range power supply voltages ? thermal sense to detect out of range thermal values ? three fan headers ? three fan sense inputs used to monitor fan activity
intel desktop board dq35mp technical product specification 12 1.1.2 board layout figure 1 shows the location of the major components. figure 1. major board components table 2 lists the components identified in figure 1.
product description 13 table 2. board components shown in figure 1 item/callout from figure 1 descri ption a front panel audio header b speaker c pci conventional bus add-in card connector d battery e pci express x1 connector f pci express x1 connector g chassis intrusion header h pci express x16 connector i back panel connectors j processor core power connector (2 x 2) k rear chassis fan connector l lga775 processor socket m intel 82q35 gmch n processor fan header o dimm channel a sockets p dimm channel b sockets q serial port header r main power connector (2 x 12) s front panel header t auxiliary front panel power led header u intel 82801ido i/o controller hub (ich9do) v bios setup configuration jumper block w front chassis fan header x serial ata connectors [5] y external serial at a (esata) connector z front panel usb header aa front panel usb header bb front panel usb header cc parallel ata ide connector dd high definition au dio link header
intel desktop board dq35mp technical product specification 14 1.1.3 block diagram figure 2 is a block diagram of the major functional areas. figure 2. block diagram
product description 15 1.2 legacy considerations this board differs from other intel ? desktop board products, with specific changes including (but not limited to) the following: ? no parallel port ? no floppy drive connector ? no ps/2 ports for mouse and keyboard ? no serial port on the back panel ? the serial port header is located near the memory sockets and may require a specialized chassis or cabling solution to use 1.3 online support to find information about? visit this world wide web site: intel desktop board dq35mp http://www.intel.com/products/m otherboard/dq35mp/index.htm desktop board support http://support.intel.com/support/motherboards/desktop available configurations for the desktop board dq35mp http://www.intel.com/products/m otherboard/dq35mp/index.htm supported processors http://www.intel.com/go/findcpu chipset information http://www.intel.com/products/d esktop/chipsets/index.htm bios and driver updates http://downloadcenter.intel.com tested memory http://support.intel.com/support/motherboards/desktop/sb/cs- 025414.htm 1.4 processor the board is designed to suppo rt the following processors: ? intel core 2 quad processor in an lga775 socket with a 1066 mhz system bus ? intel core 2 duo processor in an lg a775 socket with a 1333 mhz, 1066 mhz, or 800 mhz system bus ? intel pentium dual-core processor in an lga775 socket with an 800 mhz system bus ? intel celeron processor 400 sequence in an lga775 socket with an 800 mhz system bus other processors may be supported in the fu ture. this board is designed to support processors with a maximum wattage of 105 w. the processors listed above are only supported when falling within the wattage requirements of the dq35mp board. see the intel web site listed below for the most up-to-date list of supported processors. for information about? refer to: supported processors http://www.intel.com/go/findcpu
intel desktop board dq35mp technical product specification 16 caution use only the processors listed on the web site above. use of unsupported processors can damage the board, the proce ssor, and the power supply. # integrator?s note use only atx12v-compliant power supplies. for information about refer to power supply connectors section 2.2.2.4, page 47 1.5 system memory the board has four dimm sockets and su pport the following memory features: ? 1.8 v (only) ddr2 sdram dimms with gold-plated contacts ? unbuffered, single-sided or double-sided dimms with the following restriction: double-sided dimms with x16 organization are not supported. ? 8 gb maximum total system memory using ddr2 800 or ddr2 667 dimms; refer to section 2.1.1 on page 39 for information on the total amount of addressable memory. ? minimum total system memory: 512 mb ? non-ecc dimms ? serial presence detect ? ddr2 800 or ddr2 667 mhz sdram dimms ? ddr2 667 dimms with spd timings of only 5-5-5 (tcl-trcd-trp) ? ddr2 800 dimms with spd timings of on ly 5-5-5 or 6-6-6 (tcl-trcd-trp) note to be fully compliant with all applicable ddr sdram memory specifications, the board should be populated with dimms that support the serial presence detect (spd) data structure. this allows the bios to read the spd data and program the chipset to accurately configure memory settings for op timum performance. if non-spd memory is installed, the bios will attempt to correctly configure the memory settings, but performance and reliability may be impacted or the dimms may not function under the determined frequency.
product description 17 table 3. supported memory configurations dimm type sdram technology smallest usable dimm (one x16 single-sided dimm) largest usable dimm (one x8 double-sided dimm) maximum capacity with four identical x8 double-sided dimms ddr2 667 512 mbit 256 mb 1 gb 4 gb ddr2 667 1 gbit 512 mb 2 gb 8 gb ddr2 800 512 mbit 256 mb 1 gb 4 gb ddr2 800 1 gbit 512 mb 2 gb 8 gb for information about? refer to: tested memory http://support.intel.com/support/motherboards/desktop/sb/cs- 025414.htm 1.5.1 memory configurations the intel 82q35 gmch supports the followi ng types of memory organization: ? dual channel (interleaved) mode . this mode offers the highest throughput for real world applications. dual channel mode is enabled when the installed memory capacities of both dimm channels are equal. technology and device width can vary from one channel to the other but the inst alled memory capacity for each channel must be equal. if different speed dimms are used between channels, the slowest memory timing will be used. ? single channel (asymmetric) mode . this mode is equivalent to single channel bandwidth operation for real world applications. this mode is used when only a single dimm is installed or the memory capacities are unequal. technology and device width can vary from one channel to the other. if different speed dimms are used between channels, the slowest memory timing will be used. ? flex mode . this mode provides the most flex ible performance characteristics. the bottommost dram memory (the memory that is lowest within the system memory map) is mapped to dual channe l operation; the topmost dram memory (the memory that is nearest to the 8 gb address space limit), if any, is mapped to single channel operation. flex mode results in multiple zones of dual and single channel operation across the whole of dram memory. to use flex mode, it is necessary to popula te both channels. for information about? refer to: memory configuration examples http://www.intel.com/support/m otherboards/desktop/sb/cs- 011965.htm
intel desktop board dq35mp technical product specification 18 figure 3 illustrates the memory channel and dimm configuration. note the dimm 0 sockets of both channels are bl ue. the dimm 1 sockets of both channels are black. figure 3. memory channel and dimm configuration # integrator?s note regardless of the memory configuration used (dual channel, single channel, or flex mode), dimm 0 of channel a must always be populated. this is a requirement of the intel ? management engine in ich9do.
product description 19 1.6 intel ? q35 express chipset the intel q35 express chipset cons ists of the following devices: ? intel 82q35 graphics and memory contro ller hub (gmch) wi th direct media interface (dmi) interconnect ? intel 82801ido i/o controller hub (ich9do) the gmch component provides interfaces to the cpu, memory, pci express, and the dmi interconnect. the component also provides integrated graphics capabilities supporting 3d, 2d, and display capabilities. the ich9do is a centralized controller for the board?s i/o paths. the chipset supports the following features: ? onboard graphics ? dynamic video memory technology ? usb 2.0 ? serial ata 3 gbps for information about refer to the intel q35 express chipset http://www.intel.com/products/d esktop/chipsets/index.htm resources used by the chipset chapter 2 1.6.1 intel q35 graphics subsystem the intel q35 express chipset contains tw o separate, mutually exclusive graphics options. either the intel ? graphics media accelerator 3100 (intel ? gma 3100) graphics controller (contained within the 82q35 gmch) is used, or a pci express x16 add-in card can be used. when a pci ex press x16 add-in card is installed, the intel gma 3100 graphics controller is disabled. 1.6.1.1 intel ? graphics media accelerator 3100 graphics controller the intel gma 3100 graphics controller features the following: ? 400 mhz core frequency ? high quality texture engine ? dx9.0c* and opengl* 1.4 compliant ? hardware pixel shader 2.0 ? vertex shader model 2.0 ? 3d graphics rendering enhancements ? 1.6 dual texture gigapixel/sec max fill rate ? 16-bit and 32-bit color ? vertex cache ? video ? software dvd at 30 fps full screen ? dvmt support up to 287 mb
intel desktop board dq35mp technical product specification 20 ? display ? supports analog displays up to 2048 x 1536 at 75 hz refresh (qxga) ? dual independent display support ? ddc2b compliant interface with advanced digital display 2 card or media expansion card (add2/mec), support for tv-out/tv-in and dvi digital display connections 1.6.1.2 dynamic video memory technology (dvmt) dvmt enables enhanced graphics and memory performance through highly efficient memory utilization. dvmt ensures the most efficient use of available system memory for maximum 2-d/3-d graphics performance. up to 287 mb of system memory can be allocated to dvmt on systems that have 512 mb or more of total system memory installed. dvmt returns system memory back to the operating system when the additional system memory is no longer required by the graphics subsystem. dvmt will always use a minimal fixed portion of system physical memory (as set in the bios setup program) for compatibility with legacy applications. an example of this would be when using vga graphics under do s. once loaded, the operating system and graphics drivers allocate additional system memory to the graphics buffer as needed for performing graphics functions. note the use of dvmt requires oper ating system driver support. 1.6.1.3 configuration modes the video modes supported by this boar d are based on the extended display identification data (edid) modes of the mo nitor to which the system is connected. standard monitors are assumed. 1.6.1.4 advanced digital display (add2/mec) card support the gmch routes two multiplexed sdvo ports that are each capable of driving up to a 225 mhz pixel clock to the pci express x16 connector. when an add2/mec card is detected, the intel gma 3100 graphics contro ller is enabled and the pci express x16 connector is configured for sdvo mode. sdvo mode enables the sdvo ports to be accessed by the add2/mec card. an add2/m ec card can either be configured to support simultaneous display or can be conf igured to support dual independent display as an extended desktop configuration with different color depths and resolutions. add2/mec cards can be designed to su pport the following configurations: ? low voltage differential signaling (lvds) ? single device operating in dual channel mode ? hdtv output ? hdmi support (when used with the hd audio link)
product description 21 1.6.2 usb the board supports up to 12 usb 2.0 ports, supports uhci and ehci, and uses uhci- and ehci-compatible drivers. the ich9do provides the usb controller for all ports. the port arrangement is as follows: ? six ports are implemented with stacked back panel connectors ? six ports are routed to three separate front panel usb headers for information about refer to the location of the usb connectors on the back panel figure 10, page 42 the location of the front panel usb headers figure 11, page 43 1.6.3 serial ata interfaces the board provides five serial ata (sata) connectors, which support one device per connector. the board also provides one red-colored external serial ata (esata) connector. 1.6.3.1 serial ata support the ich9do i/o controller offers six indepe ndent serial ata ports with a theoretical maximum transfer rate of 3 gbits/sec per po rt. one device can be installed on each port for a maximum of six serial ata devices. a point-to-point interface is used for host to device connections, unlike paralle l ata ide which supports a master/slave configuration and two devices per channel. for compatibility, the underlying serial ata functionality is transparent to the operating system. the serial ata controlle r can operate in both legacy and native modes. in legacy mode, standard ide i/ o and irq resources are assigned (irq 14 and 15). in native mode, standard pci conv entional bus resource steering is used. native mode is the preferred mode for co nfigurations using the windows* xp and windows vista* operating systems. note many serial ata drives use new low-voltag e power connectors and require adapters or power supplies equipped with lo w-voltage power connectors. for more information, see: http://www.serialata.org/ . for information about refer to the location of the serial ata connectors figure 11, page 43
intel desktop board dq35mp technical product specification 22 1.6.3.2 serial ata raid the dq35mp desktop board supports the following raid (redundant array of independent drives) levels: ? raid 0 - data striping ? raid 1 - data mirroring ? raid 0+1 (or raid 10) - data striping and mirroring ? raid 5 - distributed parity 1.7 parallel ide controller the parallel ata ide controller has one bus-mastering parallel ata ide interface. the parallel ata ide interface supports the following modes: ? programmed i/o (pio): processor controls data transfer. ? 8237-style dma: dma offloads the processo r, supporting transfer rates of up to 16 mb/sec. ? ultra dma: dma protocol on ide bus su pporting host and target throttling and transfer rates of up to 33 mb/sec. ? ata-66: dma protocol on ide bus suppo rting host and target throttling and transfer rates of up to 66 mb/sec. ata-66 protocol is similar to ultra dma and is device driver compatible. ? ata-100: dma protocol on ide bus allows host and target throttling. the ata-100 logic can achieve read transfer rates up to 100 mb/sec and write transfer rates up to 88 mb/sec. note ata-66 and ata-100 are faster timings and require a specialized cable to reduce reflections, noise, and inductive coupling. the parallel ata ide interface also support s atapi devices (such as cd-rom drives) and ata devices. the bios supports logi cal block addressing (lba) and extended cylinder head sector (echs) translation modes. the drive reports the transfer rate and translation mode to the bios. for information about refer to the location of the parallel ata ide connector figure 11, page 43
product description 23 1.8 real-time clock subsystem a coin-cell battery (cr2032) powers the real-time clock and cmos memory. when the computer is not plugged into a wall so cket, the battery has an estimated life of three years. when the computer is plu gged in, the standby current from the power supply extends the life of the battery. the clock is accurate to 13 minutes/year at 25 oc with 3.3 vsb applied. note if the battery and ac power fail, custom defa ults, if previously saved, will be loaded into cmos ram at power-on. when the voltage drops below a certain leve l, the bios setup program settings stored in cmos ram (for example, the date and time) might not be accurate. replace the battery with an equivalent one. figure 1 on page 12 shows the location of the battery. 1.9 legacy i/o controller the i/o controller provides the following features: ? one serial port header ? serial irq interface compatible with serialized irq support for pci systems ? intelligent power management, including a programmable wake-up event interface ? pci power management support the bios setup program provides configuration options for the i/o controller. 1.9.1 serial port the board has one serial port header located on the component side of the board. the serial port supports data transfers at speed s up to 115.2 kbits/sec with bios support. for information about refer to the location of the serial port header figure 11, page 43 the signal names of the serial port header table 15, page 45
intel desktop board dq35mp technical product specification 24 1.10 audio subsystem the onboard audio subsystem consists of the following: ? intel 82801ido ich9do ? realtek alc268-gr audio codec ? back panel audio connectors ? component-side audio headers: ? intel ? high definition audio front panel header ? hd audio link header the audio subsystem supports the following features: ? a signal-to-noise (s/n) ratio of 95 db playback quality, and 90 db recording quality ? independent stereo audio playback from back panel connectors and intel high definition audio front panel header note the use of ac 97 front panel audio headers is not recommended if you plan to obtain microsoft windows vista certification. table 4 lists the supported functions of the front panel and back panel audio jacks. table 4. audio jack retasking support audio jack supports line in? supports line out? supports microphone? supports headphones? front panel ? green no yes no yes front panel ? pink no no yes no back panel ? blue yes no no no back panel ? green no yes no yes back panel ? pink no no yes no
product description 25 1.10.1 audio subsystem software audio software and drivers are availabl e from intel?s worl d wide web site. for information about refer to obtaining audio software and drivers section 1.2, page 15 1.10.2 audio connectors and headers the board contains audio connectors on th e back panel and audio headers on the component side of the board. the front pa nel audio header provides mic in and line out signals for the front panel. microphone bias is supported for both the front and back panel microphone connectors. the front/back panel audio connectors are configurable through the audio device drivers. the available configurable audio ports are shown in figure 4. item description a line in b line out c mic in figure 4. back panel audio connector options for information about refer to the location of the front panel audio header figure 11, page 43 the signal names of the front panel audio header table 13, page 45 the location of the hd audio link header figure 11, page 43 the signal names of the hd audio link header table 12, page 45 the back panel audio connectors section 2.2.1, page 42
intel desktop board dq35mp technical product specification 26 1.11 lan subsystem the lan subsystem consists of the following: ? intel 82566dm-2 gigabit ethernet controller (10/100/1000 mbits/sec) ? intel 82801ido ich9do ? rj-45 lan connector with integrated status leds additional features of the lan subsystem include: ? csma/cd protocol engine ? lan connect interface between ich9do and the lan controller ? pci conventional bu s power management ? acpi technology support ? lan wake capabilities ? lan subsystem software for information about refer to lan software and drivers http://downloadcenter.intel.com 1.11.1 intel ? 82566dm-2 gigabit ethernet controller the intel 82566dm-2 gigabit ethernet cont roller supports the following features: ? intel ? active management technology (intel ? amt) support ? pci express link ? 10/100/1000 ieee 802.3 compliant ? compliant to ieee 802.3x flow control support ? 802.1p and 802.1q ? tcp, ip, and udp checksum offload (for ipv4 and ipv6) ? transmit tcp segmentation ? full device driver compatibility ? pci express power management support 1.11.2 lan subsystem software lan software and drivers are available from intel?s worl d wide web site. for information about refer to obtaining lan software and drivers section 1.2, page 15
product description 27 1.11.3 rj-45 lan connector with integrated leds two leds are built into the rj-45 lan connector (shown in figure 5 below). item description a link led (green) b data rate led (green/yellow) figure 5. lan connector led locations table 5 describes the led states when the board is powered up and the lan subsystem is operating. table 5. lan connector led states led led color led state condition off lan link is not established. on lan link is established. link green blinking lan activity is occurring off 10 mbits/sec data rate is selected. green 100 mbits/sec data rate is selected. data rate green/yellow yellow 1000 mbits/sec data rate is selected.
intel desktop board dq35mp technical product specification 28 1.12 intel ? active management technology (intel ? amt) intel active management tec hnology offers it organizations tamper-resistant and persistent management capabilities. specifically, intel amt is a hardware-based solution that uses out of band communication to manage access to client systems in addition to offering encr ypted and persistent asse t management and remote diagnostics and/or recovery capabilities for networked platforms. with intel amt, it organizations can easily get accurate platform informatio n, and can perform remote updating, diagnostics, debugging and repair of a system , regardless of the state of the operating system or the po wer state of the system. the intel active management tec hnology subsystem consists of: ? arc4 microcontroller embedded in the intel ? q35 graphics and memory controller hub (gmch) ? intel 82801ido controller hub (ich9do) ? intel 82566dm-2 gigabit (10/100/1000 mbit s/sec) ethernet lan controller ? channel a dimm(s) ? bios/spi flash (32 mbits) ? on-board intel amt status led note software with amt capability is required to take advantage of intel amt platform management capabilities. 1.12.1 intel amt features the key features of intel amt include: ? secure out of band (oob) system manage ment that allows remote management of pcs regardless of system powe r or operating system state. ? ssl 3.1/tls encryption ? http authentication ? tcp/ip ? http web gui ? xml/soap api ? web services for management (ws-man) protocol support ? remote troubleshooting and recovery that can significantly redu ce desk-side visits and potentially increasing effici ency of it technical staff. ? system event log ? ide redirection (ide-r) or pxe boot: remote cd or network drive boot ? serial over lan ? oob diagnostics ? remote control ? operating system repair
product description 29 ? proactive alerting that decreases down time and minimizes time to repair. ? programmable policies ? operating system lock-up alert ? boot failure alert ? hardware failure alerts ? third party non-volatile storage that prevents users from removing critical inventory, remote control, or virus protection agents. ? nonvolatile storage for agents ? tamper-resistant ? remote hardware and softwa re asset tracking that eliminates time-consuming manual inventory tracking, which also reduces asset accounting costs. ? e-asset tag ? hw/sw inventory ? system defense 2. in addition to the in -bound and out-bound packet filtering of the previous generation, system defense 2 is an intel amt feature that uses advanced heuristics to help protect agai nst the propagation of worms through the use of preset packet filters. the numbe r of new connections made to a specific port or ip address are counted over a specif ic time window. if a preset threshold is exceeded, it will alert the management console and suspend the client?s network activity until the system can be remediated. ? remote configuration minimizes the cost to deploy intel amt by eliminating the need for it personnel to touch each client system prior to configuration. remote configuration consists of a single oem bios/firmware image that provides the intel amt client with information to authenticate connections and allows it to remotely perform a secure setup procedur e. it departments must acquire an appropriate intel amt-trusted certificat e as well as use a remote management application that supports remote config uration. remote configuration also requires the use of automatic ip addressing (dhcp). for information about refer to intel active management technology http://www.intel.com/go/iamt 1.12.2 intel amt software and drivers intel amt software and drivers are availabl e from intel?s world wide web site. the package usually consists of two separate drivers: one for the intel ? management engine interface (intel ? mei) and one for the local manageability service (lms) plus serial over lan (sol). for information about refer to obtaining intel amt software and drivers section 1.3, page 15
intel desktop board dq35mp technical product specification 30 1.13 hardware management subsystem the hardware management features enable th e board to be compatible with the wired for management (wfm) specification. th e board has several hardware management features, including the following: ? fan monitoring and control ? thermal and voltage monitoring ? chassis intrusion detection 1.13.1 hardware monitoring and fan control the features of the hardware monitoring and fan control include: ? intel quiet system technology, delivering acoustically-optimized thermal management ? fan speed control controllers and se nsors integrated into the ich9do ? remote thermal diode sensor fo r ambient temperature sensing ? thermal sensors in the processo r, 82q35 gmch, and 82801ido ich9do ? power supply monitoring of five voltages (+5 v, +12 v, +3.3 vsb, +1.25 v, and +vccp) to detect levels above or below acceptable values ? thermally monitored closed-loop fan control, for all three fans, that can adjust the fan speed or switch the fans on or off as needed 1.13.2 fan monitoring fan monitoring can be implemented using intel ? desktop utilities or third-party software. for information about refer to the functions of the fan headers section 1.14.2.2, page 35 1.13.3 chassis intrusion and detection the board supports a chassis security featur e that detects if the chassis cover is removed. the security feature uses a mechan ical switch on the chassis that attaches to the chassis intrusion header. when the chassis cover is removed, the mechanical switch is in the closed position. for information about refer to the location of the ch assis intrusion header figure 11, page 43
product description 31 1.13.4 thermal monitoring figure 6 shows the locations of th e thermal sensors and fan headers. item description a rear chassis fan b thermal diode, located on the gmch die c thermal diode, located on processor die d remote thermal sensor e processor fan f thermal diode, located on the ich9do die g front chassis fan figure 6. thermal sensors and fan headers note the minimum thermal reporting threshold fo r the gmch is 66 c. the gmch thermal sensor will display 66 c until the temperature rises above this point.
intel desktop board dq35mp technical product specification 32 1.14 power management power management is implemented at several levels, including: ? software support through advanced conf iguration and power interface (acpi) ? hardware support: ? power connector ? fan headers ? lan wake capabilities ? intel management en gine wake-on-lan ? intel amt status indicator led ? instantly available pc technology ? wake from usb ? power management event sign al (pme#) wake-up support ? wake# signal wake-up support ? +5v standby power indicator led 1.14.1 acpi acpi gives the operating system direct co ntrol over the power management and plug and play functions of a computer. the us e of acpi with the board requires an operating system that provides full acpi support. acpi features include: ? plug and play (including bus and device enumeration) ? power management control of individual devices, add-in boards (some add-in boards may require an acpi-aware driver), video displays, and hard disk drives ? methods for achieving less than 15-watt syst em operation in the power-on/standby sleeping state ? a soft-off feature that enables the operating system to power-off the computer ? support for multiple wake-up events (see table 8 on page 34) ? support for a front panel power and sleep mode switch table 6 lists the system states based on how long the power switch is pressed, dependi ng on how acpi is configured with an acpi-aware operating system. table 6. effects of pressing the power switch if the system is in this state? ?and the power switch is pressed for ?the system enters this state off (acpi g2/g5 ? soft off) less than four seconds power-on (acpi g0 ? working state) on (acpi g0 ? working state) less than four seconds soft-off/standby (acpi g1 ? sleeping state) on (acpi g0 ? working state) more than four seconds fail safe power-off (acpi g2/g5 ? soft off) sleep (acpi g1 ? sleeping state) less than four seconds wake-up (acpi g0 ? working state) sleep (acpi g1 ? sleeping state) more than four seconds power-off (acpi g2/g5 ? soft off)
product description 33 1.14.1.1 system states and power states under acpi, the operating system direct s all system and device power state transitions. the operating system puts de vices in and out of low-power states based on user preferences and knowledge of how devices are being used by applications. devices that are not being used can be tu rned off. the operating system uses information from applications and user setti ngs to put the system as a whole into a low-power state. table 7 lists the power states supported by the board along with the associated system power targets. see the ac pi specif ication for a complete description of the various system and power states. table 7. power states and targeted system power global states sleeping states processor states device states targeted system power (note 1) g0 ? working state s0 ? working c0 ? working d0 ? working state. full power > 30 w g1 ? sleeping state s1 ? processor stopped c1 ? stop grant d1, d2, d3 ? device specification specific. 5 w < power < 52.5 w g1 ? sleeping state s3 ? suspend to ram. context saved to ram. no power d3 ? no power except for wake-up logic. power < 5 w (note 2) g1 ? sleeping state s4 ? suspend to disk. context saved to disk. no power d3 ? no power except for wake-up logic. power < 5 w (note 2) g2/s5 s5 ? soft off. context not saved. cold boot is required. no power d3 ? no power except for wake-up logic. power < 5 w (note 2) g3 ? mechanical off. ac power is disconnected from the computer. no power to the system. no power d3 ? no power for wake-up logic, except when provided by battery or external source. no power to the system. service can be performed safely. notes: 1. total system power is dependent on the system co nfiguration, including add- in boards and peripherals powered by the system chassis? power supply. 2. dependent on the standby power consumptio n of wake-up devices used in the system.
intel desktop board dq35mp technical product specification 34 1.14.1.2 energy star* in 2007, the us department of energy and the us environmental protection agency revised the energy star* requirements. in tel has worked directly with these two governmental agencies to define the new requirements. intel desktop boards will meet the new requirements depend ing on system configuration. for information about refer to energy star requirements and recommended configurations http://www.intel.com/go/energystar 1.14.1.3 wake-up devices and events table 8 lists the devices or specific events that can wake the computer from specific states. table 8. wake-up devices and events these devices/events can wake up the computer? ?from this state lan s1, s3, s4, s5 (note1) pme# signal s1, s3, s4, s5 (note1) power switch s1, s3, s4, s5 rtc alarm s3, s4, s5 serial port s3 usb s3 wake# signal s1, s3, s4, s5 notes: 1. for lan and pme# signal, s5 is disabled by default in the bios setup program. setting this option to power on will enable a wake-up event from lan in the s5 state. 2. wake from s4 and s5 is optional by the specification. note the use of these wake-up events from an acpi state requires an operating system that provides full acpi support. in additi on, software, drivers, and peripherals must fully support acpi wake events. 1.14.2 hardware support caution ensure that the power supply provides adeq uate +5 v standby current if lan wake capabilities and instantly available pc technolo gy features are used. failure to do so can damage the power supply. the total am ount of standby current required depends on the wake devices supported and manufacturing options. the board provides several power manage ment hardware features, including: ? power connector ? fan headers
product description 35 ? lan wake capabilities ? intel management en gine wake-on-lan ? intel amt status indicator led ? instantly available pc technology ? wake from usb ? pme# signal wake-up support ? wake# signal wake-up support ? +5v standby power indicator led lan wake capabilities and instantly available pc technology require power from the +5 v standby line. note the use of wake from usb from an acpi state requires an operating system that provides full acpi support. 1.14.2.1 power connector atx12v-compliant power supplies can turn off the system power through system control. when an acpi-enabled system receives the correct command, the power supply removes all non-standby voltages. when resuming from an ac power failure, th e computer returns to the power state it was in before power was interrupted (on or off). the computer?s response can be set using the last power state feature in th e bios setup program?s boot menu. for information about refer to the location of the main power connector figure 11, page 43 the signal names of the main power connector table 21, page 47 1.14.2.2 fan headers the function/operation of the fan headers is as follows: ? the fans are on when the board is in the s0 state. ? the fans are off when the board is off or in the s3, s4, or s5 state. ? the processor fan header is wired to a fan tachometer input and the front and rear fan headers share the tachometer in put of the hardware monitoring and fan control device. all fan headers support cl osed-loop fan control that can adjust the fan speed or switch the fan on or off as needed. ? all fan headers have a +12 v dc connection. for information about refer to the locations of the fan headers and thermal sensors figure 6, page 31 the signal names of the processor fan header table 18, page 46 the signal names of the chassis fan headers table 17, page 46
intel desktop board dq35mp technical product specification 36 1.14.2.3 lan wake capabilities caution for lan wake capabilities, the +5 v stan dby line from the power supply must be capable of providing adequate +5 v standby current. failure to provide adequate standby current when implementing lan wake capabilities ca n damage the power supply. lan wake capabilities enable remote wake-up of the computer through a network. the lan subsystem pci bus network adapter monitors network traffic at the media independent interface. upon detecting a magic packet* frame, the lan subsystem asserts a wake-up signal th at powers up the computer. depending on the lan implementation, the board supports lan wake capabilities with acpi in the following ways: ? the pci express wake# signal ? the pci bus pme# signal for pci 2.3 compliant lan designs ? by ping ? magic packet ? the onboard lan subsystem 1.14.2.4 intel management engine wake-on-lan the board supports waking the management en gine over the network. this can be enabled in the bios and allows intel amt to be remotely turned on through a wake packet generated by a management console a pplication or a ping. the client system will be in a low power state until a management console alert requests intel amt functionality. 1.14.2.5 intel amt status indicator led the red intel amt status indicator led shows the current st ate of the intel management engine. table 9 shows the states of the intel management engine as indicated by the led. figure 7 shows the location of the intel amt status indicator led. table 9. intel amt states led led color led state condition off intel management engine is in the off state on intel management engine is in the on state, fully functional amt red blinking intel management engine is in the m1 state, system is out of band, intel management engine is functional
product description 37 figure 7. location of the intel amt status indicator led 1.14.2.6 instantly available pc technology caution for instantly available pc technology, th e +5 v standby line from the power supply must be capable of providing adequate +5 v standby current. failure to provide adequate standby current when implementing instantly available pc technology can damage the power supply. instantly available pc technology enables the board to enter the acpi s3 (suspend-to- ram) sleep-state. while in the s3 sleep-state, the computer will appear to be off (the power supply is off, and the front panel led is amber if dual colored, or off if single colored.) when signaled by a wake-up device or event, the system quickly returns to its last known wake state. table 8 on page 34 lists the devices and events that can wake the computer from the s3 state. the board supports the pc i bus power management interface specification . add-in boards that also support this specificatio n can participate in power management and can be used to wake the computer. the use of instantly available pc technolo gy requires operating system support and pci 2.3 compliant add-in cards and drivers. 1.14.2.7 wake from usb usb bus activity wakes the comput er from acpi s1 and s3 state. note wake from usb requires the use of a usb peripheral that supports wake from usb and support in the operating system.
intel desktop board dq35mp technical product specification 38 1.14.2.8 pme# signal wake-up support when the pme# signal on the pci bus is a sserted, the computer wakes from an acpi s1, s3, s4, or s5 state (with wa ke on pme enabled in bios). 1.14.2.9 wake# signal wake-up support when the wake# signal on the pci express bus is asserted, the computer wakes from an acpi s1, s3, s4, or s5 state. 1.14.2.10 +5 v standby power indicator led the +5 v standby power indicator led shows that power is still present even when the computer appears to be off. figure 8 shows the locati on of the standby power indicator led. caution if ac power has been switched off and the standby power indicator is still lit, disconnect the power cord befo re installing or removing an y devices connected to the board. failure to do so could damage the board an d any attached devices. figure 8. location of the standby power indicator led 1.15 trusted platform module (tpm) the tpm 1.2 component is specifically desi gned to enhance platform security above- and-beyond the capabilities of today?s software by providing a protected space for key operations and other security critical task s. using both hardware and software, the tpm protects encryption and signature ke ys at their most vulnerable stages? operations when the keys are being used une ncrypted in plain-text form. the tpm is specifically designed to shield unencrypted keys and platform authentication information from software-based attacks. for information about refer to tpm 1.2 https://www.trustedcomputi nggroup.org/groups/tpm/
39 2 technical reference what this chapter contains 2.1 memory map................................................................................... 39 2.2 connectors and headers................................................................... 41 2.3 jumper block .................................................................................. 51 2.4 mechanical considerations ........... ..................................................... 52 2.5 electrical considerations ........... ........................................................ 53 2.6 thermal considerations .................................................................... 54 2.7 reliability ....................................................................................... 56 2.8 environmental ................................................................................ 56 2.1 memory map 2.1.1 addressable memory the board utilizes 8 gb of addressable system memory. typically the address space that is allocated for pci conventional bu s add-in cards, pci express configuration space, bios (spi flash), and chipset overhe ad resides above the top of dram (total system memory). on a system that has 8 gb of system memory installed, it is not possible to use all of the installed memo ry due to system address space being allocated for other system critical function s. these functions include the following: ? bios/spi flash (32 mbits) ? local apic (19 mb) ? digital media interface (40 mb) ? front side bus interrupts (17 mb) ? pci express configuration space (256 mb) ? gmch base address register s, internal graphics ranges , pci express ports (up to 512 mb) ? memory-mapped i/o that is dynamically allocated for pci conventional and pci express add-in cards ? base graphics memory su pport (1 mb or 8 mb) ? intel management engine interface single channel (8 mb) or dual channel (16 mb)
intel desktop board dq35mp technical product specification 40 the amount of installed memory that can be used will vary based on add-in cards and bios settings. figure 9 shows a schematic of the sy st em memory map. all installed system memory can be used when there is no overlap of system addresses. upper bios area (64 kb) lower bios area (64 kb; 16 kb x 4) add-in card bios and buffer area (128 kb; 16 kb x 8) standard pci/ isa video memory (smm memory) 128 kb dos area (640 kb) 1 mb 960 kb 896 kb 768 kb 640 kb 0 kb 0fffffh 0f0000h 0effffh 0e0000h 0dffffh 0c0000h 0bffffh 0a0000h 09ffffh 00000h flash apic reserved 0 mb 640 kb 1 mb top of usable dram (memory visible to the operating system) pci memory range - contains pci, chipsets, direct media interface (dmi), and ich ranges (approximately 750 mb) dos compatibility memory dram range om18311 ~20 mb 8 gb top of system address space upper 4 gb of address space figure 9. detailed system memory address map
technical reference 41 table 10 lists the system memory map. table 10. system memory map address range (decimal) address range (hex) size description 1024 k - 8388608 k 100000 - 1ffffffff 8191 mb extended memory 960 k - 1024 k f0000 - fffff 64 kb runtime bios 896 k - 960 k e0000 - effff 64 kb reserved 800 k - 896 k c8000 - dffff 96 kb potential available high dos memory (open to the pci bus). dependent on video adapter used. 640 k - 800 k a0000 - c7fff 160 kb video memory and bios 639 k - 640 k 9fc00 - 9ffff 1 kb extended bios data (movable by memory manager software) 512 k - 639 k 80000 - 9fbff 127 kb extended conventional memory 0 k - 512 k 00000 - 7ffff 512 kb conventional memory 2.2 connectors and headers caution only the following connectors and headers ha ve overcurrent protection: back panel and front panel usb. the other internal connectors/headers ar e not overcurrent protected and should connect only to devices inside the computer ?s chassis, such as fans and internal peripherals. do not use these connectors/ headers to power devices external to the computer?s chassis. a fault in the load pr esented by the external devices could cause damage to the computer, the power cable, and the external devices themselves. note computer systems that have an unshielde d cable attached to a usb port may not meet fcc class b requirements, even if no device is attached to the cable. use shielded cable that meets the requir ements for full-speed devices. this section describes the board?s conne ctors and headers. the connectors and headers can be divided into these groups: ? back panel i/o connectors (see page 42) ? component-side connectors and headers (see page 43)
intel desktop board dq35mp technical product specification 42 2.2.1 back panel connectors figure 10 shows the location of the back panel connectors. item description a vga port b usb ports [2] c usb ports [2] d lan e usb ports [2] f audio line in g mic in h audio line out figure 10. back panel connectors note the back panel audio line out connector is designed to power headphones or amplified speakers only. poor audio quality occurs if passive (non-amplified) speakers are connected to this output.
technical reference 43 2.2.2 component-side connectors and headers figure 11 shows the locations of the co mponent-side connectors and headers. figure 11. component-side connectors and headers
intel desktop board dq35mp technical product specification 44 table 11 lists the component-side co nnectors and headers identified in figure 11. table 11. component-side connectors and headers shown in figure 11 item/callout from figure 11 descri ption a front panel audio header b pci conventional bus add-in card connector c pci express x1 add-in card connector d pci express x1 add-in card connector e chassis intrusion header f pci express x16 add-in card connector g processor core power connector (2 x 2) h rear chassis fan header i processor fan header j serial port header k main power connector (2 x 12) l front panel header m auxiliary front panel power led header n front chassis fan header o serial ata connectors [5] p external serial at a (esata) connector q front panel usb header r front panel usb header s front panel usb header t parallel ata ide connector u high definition au dio link header
technical reference 45 2.2.2.1 signal tables for the connectors and headers table 12. hd audio link header pin signal name pin signal name 1 bclk 2 ground 3 rst# 4 3.3 vcc 5 sync 6 ground 7 sdo 8 3.3 vcc 9 sdi0 10 +12 v 11 sdi1 12 key (no pin) 13 aud rsvd 14 3.3 v stby 15 aud rsvd 16 ground table 13. front panel audio header pin signal name pin signal name 1 [port 2] left channel 2 ground 3 [port 2] right channel 4 presence# (dongle present) 5 [port 1] right channel 6 [port 1] sense_return 7 sense_send (jack detection) 8 key (no pin) 9 [port 2] left channel 10 [port 2] sense_return table 14. serial ata connectors pin signal name 1 ground 2 txp 3 txn 4 ground 5 rxn 6 rxp 7 ground table 15. serial port header pin signal name pin signal name 1 dcd 2 rxd# 3 txd# 4 dtr 5 ground 6 dsr 7 rts 8 cts 9 ri 10 key (no pin)
intel desktop board dq35mp technical product specification 46 table 16. chassis intrusion header pin signal name 1 intruder 2 ground table 17. front and rear chassis (3-pin) fan headers pin signal name 1 control 2 +12 v 3 tach table 18. processor (4-pin) fan header pin signal name 1 ground 2 +12 v 3 fan_tach 4 fan_control 2.2.2.2 add-in card connectors the board has the following add-in card connectors: ? pci express x16: one connector supportin g simultaneous transfer speeds up to 4 gbytes/sec of peak bandwi dth per direction and up to 8 gbytes/sec concurrent bandwidth. ? pci express x1: two pci express x1 co nnectors. the x1 interface supports simultaneous transfer speeds up to 250 mbytes/sec of peak bandwidth per direction and up to 500 mbytes /sec concurrent bandwidth. ? pci conventional (rev 2.3 compliant) bus: one pci conventional bus add-in card connector. pci conventional bus add-in cards with smbus support can access sensor data and other informat ion residing on the board. note the following considerations fo r the pci conventional bus connector: ? the pci conventional bus connector is bus master capable. ? smbus signals are routed to the pci conven tional bus connector. this enables pci conventional bus add-in boards with smbu s support to access sensor data on the board. the specific smbus signals are as follows: ? the smbus clock line is connected to pin a40. ? the smbus data line is connected to pin a41.
technical reference 47 2.2.2.3 auxiliary front panel power/sleep led header pins 1 and 3 of this header duplicate the signals on pins 2 and 4 of the front panel header. table 19. auxiliary front panel power/sleep led header pin signal name in/out description 1 hdr_blnk_grn out front panel green led 2 not connected 3 hdr_blnk_yel out front panel yellow led 2.2.2.4 power supply connectors the board has the following power supply connectors: ? main power ? a 2 x 12 connector. this connector is compatible with 2 x 10 connectors previously used on intel desk top boards. the board supports the use of atx12v power supplies with either 2 x 10 or 2 x 12 main power cables. when using a power supply with a 2 x 10 main po wer cable, attach that cable on the rightmost pins of the main power connector, leaving pins 11, 12, 23, and 24 unconnected. ? processor core power ? a 2 x 2 connector. this connector provides power directly to the processor voltage regulator and must always be used. failure to do so will prevent the board from booting. table 20. processor core power connector pin signal name pin signal name 1 ground 2 ground 3 +12 v 4 +12 v table 21. main power connector pin signal name pin signal name 1 +3.3 v 13 +3.3 v 2 +3.3 v 14 -12 v 3 ground 15 ground 4 +5 v 16 ps-on# (power supply remote on/off) 5 ground 17 ground 6 +5 v 18 ground 7 ground 19 ground 8 pwrgd (power good) 20 no connect 9 +5 v (standby) 21 +5 v 10 +12 v 22 +5 v 11 +12 v (note) 23 +5 v (note) 12 2 x 12 connector detect (note) 24 ground (note) note: when using a 2 x 10 power supply cable, this pin will be unconnected. for information about refer to power supply considerations section 2.5.1on page 53
intel desktop board dq35mp technical product specification 48 2.2.2.5 front panel header this section describes the functi ons of the front panel header. table 22 lists the signal names of the front panel header. figure 12 is a connection diagram for the front panel header. table 22. front panel header pin signal in/ out description pin signal in/ out description hard drive activity led power led 1 hd_pwr out hard disk led pull-up to +5 v 2 hdr_blnk_grn out front panel green led 3 hda# out hard disk active led 4 hdr_blnk_yel out front panel yellow led reset switch on/off switch 5 ground ground 6 fpbut_in in power switch 7 fp_reset# in reset switch 8 ground ground power not connected 9 +5 v power 10 n/c not connected figure 12. connection diagram for front panel header 2.2.2.5.1 hard drive activity led header pins 1 and 3 can be connected to an led to provide a visual indicator that data is being read from or written to a hard drive. proper led function requires one of the following: ? a serial ata hard drive connected to an onboard serial ata connector ? a parallel ata ide hard drive connected to an onboard parallel ata ide connector
technical reference 49 2.2.2.5.2 reset switch header pins 5 and 7 can be connected to a momentar y single pole, single throw (spst) type switch that is normally open. when the swit ch is closed, the board resets and runs the post. 2.2.2.5.3 power/sleep led header pins 2 and 4 can be connected to a one- or two-color led. table 23 shows the possible states for a one-color led. table 24 shows the possible states for a two-color led. table 23. states for a one-color power led led state description off power off/sleeping steady green running table 24. states for a two-color power led led state description off power off steady green running steady yellow sleeping note the colors listed in table 23 and table 24 are suggested colors only. actual led colors are chassis-specific. 2.2.2.5.4 power switch header pi ns 6 and 8 can be connected to a front panel momentary-contact power switch. the switch must pull the sw_on# pin to ground for at least 50 ms to signal the power supply to switch on or off. (the time requ irement is due to inte rnal debounce circuitry on the board.) at least two seconds must pass before the power supply will recognize another on/off signal.
intel desktop board dq35mp technical product specification 50 2.2.2.6 front panel usb headers figure 13 is a connection diagram for the front panel usb headers. # integrator?s notes ? the +5 v dc power on the usb headers is fused. ? use only a front panel usb connector that conforms to the usb 2.0 specification for high-speed usb devices. figure 13. connection diagram for front panel usb headers
technical reference 51 2.3 jumper block caution do not move the jumper with the power on. always turn off the power and unplug the power cord from the computer before chan ging a jumper setting. otherwise, the board could be damaged. figure 14 shows the location of the jumper block. the jumper determines the bios setup program?s mode. table 25 lists the jumper settings for the three modes: normal , configure, and recovery. when the jumper is set to configure mode and the computer is powered-up, the bios compares the processor version and the microcode version in the bios and reports if the two match. figure 14. location of the jumper block table 25. bios setup configuration jumper settings function/mode jumper setting configuration normal 1-2 321 the bios uses current configuration information and passwords for booting. configure 2-3 321 after the post runs, setup runs automatically. the maintenance menu is displayed. recovery none 321 the bios attempts to recover the bios configuration. see section 3.7 for more information on bios recovery.
intel desktop board dq35mp technical product specification 52 2.4 mechanical considerations 2.4.1 form factor the board is designed to fit into an atx-form-factor chassis. figure 15 illustrates the mech anical form factor for the board. dimensions are given in inches [millimeters]. the outer dimensions are 9.60 inches by 9.60 inches [243.84 millimeters by 243.84 millimeters]. location of the i/ o connectors and mounting holes are in compliance with the atx specification. figure 15. board dimensions
technical reference 53 2.5 electrical considerations 2.5.1 power supply considerations caution the +5 v standby line from the power supply must be capable of providing adequate +5 v standby current. failure to do so can damage the power supply. the total amount of standby current required depe nds on the wake devices supported and manufacturing options. additional power required will depend on configurations chosen by the integrator. the power supply must comply with the indi cated parameters of the atx form factor specification. ? the potential relation between 3.3 vdc and +5 vdc power rails ? the current capability of the +5 vsb line ? all timing parameters ? all voltage tolerances for example, for a system consisting of a supported 65 w processor (see section 1.4 on page 15 for a list of supported processors), 1 gb ddr2 ram, one hard disk drive, one optical drive, and all board periph erals enabled, the minimum recommended power supply is 300 w. table 27 lists the recommended power supply current values. table 26. recommended power supply current values output voltage 3.3 v 5 v 12 v1 12 v2 -12 v 5 vsb current 15 a 15 a 10 a 10 a 0.3 a 3.0 a for information about refer to selecting an approp riate power supply http://support.intel.com/support/motherboards/de sktop/sb/cs-026472.htm 2.5.2 fan header current capability caution the processor fan must be connected to the processor fan header, not to a chassis fan header. connecting the processor fan to a chassis fan header may result in onboard component damage that will halt fan operation. table 27 lists the current capability of the fan headers. table 27. fan header current capability fan header maximum available current processor fan 2.0 a front chassis fan 1.5 a rear chassis fan 1.5 a
intel desktop board dq35mp technical product specification 54 2.5.3 add-in board considerations the board is designed to provide 2 a (average ) of +5 v current for each add-in board. the total +5 v current draw for add-in bo ards for a fully loaded board (all three expansion slots and the pci express x16 connector filled) must not exceed 14 a. 2.6 thermal considerations caution a chassis with a maximum intern al ambient temperature of 38 o c at the processor fan inlet is a requirement. use a processor he at sink that provides omni-directional airflow to maintain required airflow ac ross the processor voltage regulator area. caution failure to ensure appropriate airflow may re sult in reduced performance of both the processor and/or voltage regulator or, in some instances, damage to the board. for a list of chassis that have been tested with intel desktop boards please refer to the following website: http://developer.intel.com/design/motherbd/cooling.htm all responsibility for determining the adeq uacy of any thermal or system design remains solely with the reader. intel ma kes no warranties or representations that merely following the instructions presented in this document will result in a system with adequate thermal performance. caution ensure that the ambient temperature does not exceed the board?s maximum operating temperature. failure to do so could cause components to exceed their maximum case temperature and malfunction. for info rmation about the maximum operating temperature, see the environmental specifications in section 2.8. caution ensure that proper airflow is maintained in the processor voltage regulator circuit. failure to do so may result in damage to the voltage regu lator circuit. the processor voltage regulator area (shown in figure 16) can reach a temperature of up to 85 o c in an open chassis.
technical reference 55 figure 16 shows the locations of the localized high temperature zones. item description a processor voltage regulator area b processor c intel 82q35 gmch d intel 82801ido ich9do figure 16. localized high temperature zones table 28 provides maximum case temperatur es for the board components that are sensitive to thermal changes. the operating temperature, current load, or operating frequency could affect case temperatures. maximum case temperatures are important when considering proper airflow to cool the board. table 28. thermal considerations for components component maximum case temperature processor for processor case temper ature, see processor datasheets and processor specification updates intel 82q35 gmch 97 o c (under bias) intel 82801ido ich9do 92 o c (under bias) for information about refer to processor datasheets and spec ification updates section 1.2, page 15
intel desktop board dq35mp technical product specification 56 2.7 reliability the mean time between failures (mtbf) pred iction is calculated using component and subassembly random failure rates. the calculation is based on the bellcore reliability prediction procedure, tr-nwt-000332, issue 4, september 1991. the mtbf prediction is used to estimate repa ir rates and spare parts requirements. the mtbf data is calculated from pred icted data at 55 oc. the desktop board dq35mp mtbf is 225,125 hours. 2.8 environmental table 29 lists the environmental specifications for the board. table 29. desktop board dq35mp environmental specifications parameter specification temperature non-operating -40 c to +70 c operating 0 c to +55 c shock unpackaged 50 g trapezoidal waveform velocity change of 170 inches/second2 packaged half sine 2 millisecond product weight (pounds) free fall (inches) velocity change (inches/sec2) <20 36 167 21-40 30 152 41-80 24 136 81-100 18 118 vibration unpackaged 5 hz to 20 hz: 0.01 g2 hz sloping up to 0.02 g2 hz 20 hz to 500 hz: 0.02 g2 hz (flat) packaged 10 hz to 40 hz: 0.015 g2 hz (flat) 40 hz to 500 hz: 0.015 g2 hz sloping down to 0.00015 g2 hz
57 3 overview of bios features what this chapter contains 3.1 introduction ................................................................................... 57 3.2 bios flash memory organization .. ..................................................... 58 3.3 resource configuration ............ ........................................................ 58 3.4 system management bios (smbios)................................................. 59 3.5 legacy usb support ........................................................................ 60 3.6 bios updates ................................................................................. 61 3.7 bios recovery................................................................................ 62 3.8 boot options................................................................................... 62 3.9 adjusting boot speed....................................................................... 63 3.10 bios security features .................................................................... 64 3.1 introduction the board uses an intel bios that is stored in the serial periph eral interface flash memory (spi flash) and can be updated using a disk-based program. the spi flash contains the bios setup program, post, the pci auto-configuration utility, lan eeprom information, and plug and play support. the bios displays a message during post id entifying the type of bios and a revision code. the initial production bioss are identified as joq3510j .86a. when the bios setup configuration jumper is set to configure mode and the computer is powered-up, the bios compares the cpu version and the microcode version in the bios and reports if the two match. the bios setup program can be used to view and change the bios settings for the computer. the bios setup program is acce ssed by pressing the key after the power-on self-test (post) memory test begi ns and before the operating system boot begins. the menu bar is shown below. maintenance main advanced security power boot intel me exit note the maintenance menu is displayed only when the board is in configure mode. section 2.3 on page 51 shows how to put the board in configure mode.
intel desktop board dq35mp technical product specification 58 table 30 lists the bios setup program menu features. table 30. bios setup program menu bar maintenance main advanced security power boot intel me exit clears passwords and displays processor information displays processor and memory configure- tion configures advanced features available through the chipset sets passwords and security features configures power manage- ment features and power supply controls selects boot options configures options for the intel management engine and intel active management technology saves or discards changes to setup program options table 31 lists the function ke ys available for menu screens. table 31. bios setup program function keys bios setup program function key description < > or < > selects a different menu screen (mov es the cursor left or right) < > or < > selects an item (moves the cursor up or down) selects a field (not implemented) executes command or selects the submenu load the default configurat ion values for the current menu save the current values and exits the bios setup program exits the menu 3.2 bios flash memory organization the serial peripheral interf ace flash memory (spi flash) includes a 32 mbit (4096 kb) flash memory device. 3.3 resource configuration 3.3.1 pci autoconfiguration the bios can automatically configure pci de vices. pci devices may be onboard or add-in cards. autoconfiguration lets a user insert or remove pc i cards without having to configure the system. when a user turns on the system after adding a pci card, the bios automatically configures interru pts, the i/o space, and other system resources. any interrupts set to available in setup are considered to be available for use by the add-in card.
overview of bios features 59 3.3.2 pci ide support if you select auto in the bios setup prog ram, the bios automatically sets up the pci ide connector with independent i/o ch annel support. the ide interface supports hard drives up to ata-66/100 and recognizes any atapi compliant devices, including cd-rom drives, tape drives, and ultra dma drives. the bios determines the capabilities of each drive and configures them to optimize capacity and performance. to take advantage of the high capacities typically available today, hard drives are automatically configured for logical block a ddressing (lba) and to pio mode 3 or 4, depending on the capability of the drive. you can override the auto-configuration options by specifying manual configuration in the bios setup program. to use ata-66/100 features the following items are required: ? an ata-66/100 peripheral device ? an ata-66/100 compatible cable ? ata-66/100 operating system device drivers note do not connect an ata device as a slave on the same ide cable as an atapi master device. for example, do not connect an ata hard drive as a slave to an atapi cd-rom drive. 3.4 system management bios (smbios) smbios is a desktop management interfac e (dmi) compliant method for managing computers in a managed network. the main component of smbios is the management information format (mif) database, which contains information about the computing system and its components. using smbios, a system admi nistrator can obtain the system types, capabilities, operational status, and installation dates for system components. the mif database defines the data and provides th e method for accessing this information. the bios enables applications such as third-party management software to use smbios. the bios stores and report s the following smbios information: ? bios data, such as the bios revision level ? fixed-system data, such as peripher als, serial numbers , and asset tags ? resource data, such as memory si ze, cache size, and processor speed ? dynamic data, such as event detection and error logging non-plug and play operating systems require an additional interface for obtaining the smbios information. the bios supports an smbios table interface for such operating systems. using this support, an smbios service-level application running on a non-plug and play operating system can obtain the smbios information. additional board information can be found in the bios under the additional information header under the main bios page.
intel desktop board dq35mp technical product specification 60 3.5 legacy usb support legacy usb support enables usb devices to be used even when the operating system?s usb drivers are not yet available. legacy usb support is used to access the bios setup program, and to install an op erating system that supports usb. by default, legacy usb suppo rt is set to enabled. legacy usb support operates as follows: 1. when you apply power to the comput er, legacy support is disabled. 2. post begins. 3. legacy usb support is enabled by the bios allowing you to use a usb keyboard to enter and configure the bios setup program and the maintenance menu. 4. post completes. 5. the operating system loads. while the operating system is loading, usb keyboards and mice are recognized and ma y be used to configure the operating system. (keyboards and mice are not recogn ized during this period if legacy usb support was set to disabled in the bios setup program.) 6. after the operating system loads the usb drivers, all legacy and non-legacy usb devices are recognized by the operating system, and legacy usb support from the bios is no longer used. 7. additional usb legacy feature opti ons can be access by using intel ? integrator toolkit. to install an operating system that supports usb, verify that legacy usb support in the bios setup program is set to enabled and follow the operating system?s installation instructions.
overview of bios features 61 3.6 bios updates the bios can be updated using either of the following utilities, which are available on the intel world wide web site: ? intel ? express bios update utility, which enables automated updating while in the windows environment. using this utility, the bios can be updated from a file on a hard disk, a usb drive (a flash drive or a usb hard drive), or a cd-rom, or from the file location on the web. ? intel ? flash memory update utility, which requires booting from dos. using this utility, the bios can be updated from a file on a hard disk, a usb drive (a flash drive or a usb hard drive), or a cd-rom. both utilities verify that the updated bios matches the target system to prevent accidentally installing an incompatible bios. note review the instructions distributed with th e upgrade utility before attempting a bios update. for information about refer to bios update utilities http://support.intel.com/support/motherboards/de sktop/sb/cs-022312.htm . 3.6.1 language support the bios setup program and help messages ar e supported in us english. additional languages are available in the integrator?s toolkit utility. check the intel website for details. 3.6.2 custom splash screen during post, an intel ? splash screen is displayed by de fault. this splash screen can be augmented with a custom splash screen. the intel integrator?s toolkit that is available from intel can be used to create a custom splash screen. note if you add a custom splash screen, it will share space with the intel branded logo. for information about refer to intel integrator toolkit http://developer.intel.com/des ign/mo therbd/software/itk/ additional intel ? software tools http://developer.intel.com/products/motherboard/dq35mp/ tools.htm and http://developer.intel.com/d esign/mo therbd/software.htm
intel desktop board dq35mp technical product specification 62 3.7 bios recovery it is unlikely that anything will interrupt a bios update; however, if an interruption occurs, the bios could be damaged. table 32 lists the drives and media types that can and cannot be used for bios recovery. the bios recovery media does not need to be made bootable. table 32. acceptable drives/media types for bios recovery media type can be used for bios recovery? cd-rom drive connected to the parallel ata interface yes cd-rom drive connected to the serial ata interface yes usb removable drive (a usb flash drive, for example) yes usb diskette drive (with a 1.44 mb diskette) no usb hard disk drive no for information about refer to bios recovery http://support.intel.com/support/motherboards/desktop/ sb/cs-022312.htm 3.8 boot options in the bios setup program, the user can ch oose to boot from a diskette drive, hard drive, usb drive, usb flash drive, cd-rom, or the network. the default setting is for the diskette drive to be the first boot de vice, the hard drive second, and the atapi cd-rom third. if enabled, the last default boot device is the network. 3.8.1 cd-rom boot booting from cd-rom is supported in compliance to the el torito bootable cd-rom format specification. under the boot me nu in the bios setup program, atapi cd- rom is listed as a boot device. boot devices are defined in pr iority order. accordingly, if there is not a bootable cd in the cd-rom drive, the system will attempt to boot from the next defined drive. 3.8.2 network boot the network can be selected as a boot device. this selection allows booting from the onboard lan or a network add-in card with a remote boot rom installed. pressing the key during post automati cally forces booting from the lan. to use this key during post, the user access le vel in the bios setup program's security menu must be set to full.
overview of bios features 63 3.8.3 booting without attached devices for use in embedded applications, the bios has been designed so that after passing the post, the operating system loader is in voked even if the following devices are not present: ? video adapter ? keyboard ? mouse 3.8.4 changing the default boot device during post pressing the key during post causes a boot device menu to be displayed. this menu displays the list of available boot de vices (as set in the bios setup program?s boot device priority submenu). table 33 lists the boot device menu options. table 33. boot device menu options boot device menu function keys description < > or < > selects a default boot device exits the menu, saves changes, and boots from the selected device exits the menu without saving changes 3.9 adjusting boot speed these factors affect system boot speed: ? selecting and configuring peripherals properly ? optimized bios boot parameters 3.9.1 peripheral selection and configuration the following techniques help improve system boot speed: ? choose a hard drive with parameters, such as ?power-up to data ready? of less than eight seconds, th at minimize hard driv e startup delays. ? select a cd-rom drive with a fast initialization rate. this rate can influence post execution time. ? eliminate unnecessary add-in adapter features, such as logo displays, screen repaints, or mode changes in post. th ese features may add time to the boot process. ? try different monitors. some monitors initialize and communicate with the bios more quickly, which enables the system to boot more quickly.
intel desktop board dq35mp technical product specification 64 3.9.2 bios boot optimizations use of the following bios setup program se ttings reduces the post execution time. ? in the boot menu, set the hard disk drive as the first boot device. as a result, the post does not first seek a diskette driv e, which saves about one second from the post execution time. ? in the peripheral configuration submenu, disable the lan device if it will not be used. this can reduce up to four seconds of option rom boot time. note it is possible to optimize the boot process to the point where the system boots so quickly that the intel logo screen (or a cust om logo splash screen) will not be seen. monitors and hard disk drives with minimum initialization times can also contribute to a boot time that might be so fast that necessary logo screen s and post messages cannot be seen. this boot time may be so fast that some drives might be no t be initialized at all. if this condition should occur, it is possibl e to introduce a programmable delay ranging from three to 30 seconds (using the hard disk pre-delay feature of the advanced menu in the drive configuration subm enu of the bios setup program). 3.10 bios security features the bios includes security features that restrict access to the bios setup program and who can boot the computer. a superv isor password and a user password can be set for the bios setup program and for booting the computer, with the following restrictions: ? the supervisor password gives unrestricte d access to view and change all the setup options in the bios setup program. this is the supervisor mode. ? the user password gives restri cted access to view and ch ange setup options in the bios setup program. this is the user mode. ? if only the supervisor password is set, pressing the key at the password prompt of the bios setup program allows the user restricted access to setup. ? if both the supervisor and user passwor ds are set, users can enter either the supervisor password or the user password to access setup. users have access to setup respective to which password is entered. ? setting the user password restricts who can boot the computer. the password prompt will be displayed before the computer is booted. if only the supervisor password is set, the computer boots with out asking for a password. if both passwords are set, the user can enter ei ther password to boot the computer. ? for enhanced security, use different pa sswords for the supervisor and user passwords. ? valid password characters are a-z, a-z, and 0-9. passwords may be up to 16 characters in length.
overview of bios features 65 table 34 shows the effects of setting the supervisor password and user password. this table is for reference only and is not displayed on the screen. table 34. supervisor and user password functions password set supervisor mode user mode setup options password to enter setup password during boot neither can change all options (note) can change all options (note) none none none supervisor only can change all options can change a limited number of options supervisor password supervisor none user only n/a can change all options enter password clear user password user user supervisor and user set can change all options can change a limited number of options supervisor password enter password supervisor or user supervisor or user note: if no password is set, any user can change all setup options.
intel desktop board dq35mp technical product specification 66
67 4 error messages and beep codes what this chapter contains 4.1 speaker ......................................................................................... 67 4.2 bios beep codes ............................................................................ 67 4.3 bios error messages ....................................................................... 67 4.4 port 80h post codes ....................................................................... 68 4.1 speaker the board-mounted speaker provides audi ble error code (beep code) information during post. for information about refer to the location of the onboard speaker figure 1, page 12 4.2 bios beep codes whenever a recoverable error occurs duri ng post, the bios displays an error message describing the problem (see table 35). table 35. beep codes type pattern frequency memory error three long beeps 1280 hz thermal warning four alternating beeps: high tone, low tone, high tone, low tone high tone: 2000 hz low tone: 1600 hz 4.3 bios error messages table 36 lists the error messages and pr ovides a brief description of each. table 36. bios error messages error message explanation cmos battery low the battery may be losing power. replace the battery soon. cmos checksum bad the cmos checksum is incorrect. cmos memory may have been corrupted. run setup to reset values. memory size decreased memory size has decr eased since the last boot. if no memory was removed, then memory may be bad. no boot device available system did not find a device to boot.
intel desktop board dq35mp technical product specification 68 4.4 port 80h post codes during the post, the bios generates diagno stic progress codes (post codes) to i/o port 80h. if the post fails, execution stops and the last post code generated is left at port 80h. this code is useful for de termining the point wher e an error occurred. displaying the post codes requires a pci bu s add-in card, often called a post card. the post card can decode the port and disp lay the contents on a medium such as a seven-segment display. note the post card must be installed in pci bus connector 1. the following tables provide information about the post codes generated by the bios: ? table 37 lists the port 80h post code ranges ? table 38 lists the port 80h post codes themselves ? table 39 lists the port 80h post sequence note in the tables listed above, all post codes and range values are listed in hexadecimal. table 37. port 80h post code ranges range category/subsystem 00 ? 0f debug codes: can be used by any peim/driver for debug. 10 ? 1f host processors: 1f is an unrecoverable cpu error. 20 ? 2f memory/chipset: 2f is no memory detected or no useful memory detected. 30 ? 3f recovery: 3f indicated recovery failure. 40 ? 4f reserved for future use. 50 ? 5f i/o busses: pci, usb, ata, etc. 5f is an unrecoverable error. start with pci. 60 ? 6f reserved for future use (for new busses). 70 ? 7f output devices: all output cons oles. 7f is an unrecoverable error. 80 ? 8f reserved for future us e (new output console codes). 90 ? 9f input devices: keyboard/mouse . 9f is an unrecoverable error. a0 ? af reserved for future use (new input console codes). b0 ? bf boot devices: includes fixed media and removable media. bf is an unrecoverable error. c0 ? cf reserved for future use. d0 ? df boot device selection. e0 ? ff e0 ? ee: miscellaneous codes. see table 38. ef : boot/s3 resume failure. f0 ? ff: ff processor exception.
error messages and beep codes 69 table 38. port 80h post codes post code description of post operation host processor 10 power-on initialization of the host processor (boot strap processor) 11 host processor cache initialization (including aps) 12 starting application processor initialization 13 smm initialization chipset 21 initializing a chipset component memory 22 reading spd from memory dimms 23 detecting presence of memory dimms 24 programming timing parameters in the memory controller and the dimms 25 configuring memory 26 optimizing memory settings 27 initializing memory, such as ecc init 28 testing memory pci bus 50 enumerating pci busses 51 allocating resources to pci bus 52 hot plug pci controller initialization 53 ? 57 reserved for pci bus usb 58 resetting usb bus 59 reserved for usb ata/atapi/sata 5a resetting pata/sata bus and all devices 5b reserved for ata smbus 5c resetting smbus 5d reserved for smbus local console 70 resetting the vga controller 71 disabling the vga controller 72 enabling the vga controller remote console 78 resetting the console controller 79 disabling the console controller 7a enabling the console controller continued
intel desktop board dq35mp technical product specification 70 table 38. port 80h post codes (continued) post code description of post operation keyboard (usb) 90 resetting keyboard 91 disabling keyboard 92 detecting presence of keyboard 93 enabling the keyboard 94 clearing keyboard input buffer mouse (usb) 98 resetting mouse 99 disabling mouse 9a detecting presence of mouse 9b enabling mouse fixed media b0 resetting fixed media b1 disabling fixed media b2 detecting presence of a fixed me dia (ide hard drive detection etc.) b3 enabling/configuring a fixed media removable media b8 resetting removable media b9 disabling removable media ba detecting presence of a removable media (ide, cd-rom detection, etc.) bc enabling/configuring a removable media bds d y trying boot selection y (y=0 to 15) pei core e0 started dispatching peims (emitted on first report of efi_sw_pc_init_begin efi_sw_pei_pc_handoff_to_next) e2 permanent memory found e1, e3 reserved for pei/peims dxe core e4 entered dxe phase e5 started dispatching drivers e6 started connecting drivers continued
error messages and beep codes 71 table 38. port 80h post codes (continued) post code description of post operation dxe drivers e7 waiting for user input e8 checking password e9 entering bios setup eb calling legacy option roms runtime phase/efi op erating system boot f4 entering sleep state f5 exiting sleep state f8 efi boot service exitbootservices ( ) has been called f9 efi runtime service setvirtual addressmap ( ) has been called fa efi runtime service resetsystem ( ) has been called peims/recovery 30 crisis recovery has initiated per user request 31 crisis recovery has initiated by software (corrupt flash) 34 loading recovery capsule 35 handing off control to the recovery capsule 3f unable to recover
intel desktop board dq35mp technical product specification 72 table 39. typical port 80h post sequence post code description 21 initializing a chipset component 22 reading spd from memory dimms 23 detecting presence of memory dimms 25 configuring memory 28 testing memory 34 loading recovery capsule e4 entered dxe phase 12 starting application processor initialization 13 smm initialization 50 enumerating pci busses 51 allocating resourced to pci bus 92 detecting the presence of the keyboard 90 resetting keyboard 94 clearing keyboard input buffer 95 keyboard self test eb calling video bios 58 resetting usb bus 5a resetting pata/sata bus and all devices 92 detecting the presence of the keyboard 90 resetting keyboard 94 clearing keyboard input buffer 5a resetting pata/sata bus and all devices 28 testing memory 90 resetting keyboard 94 clearing keyboard input buffer e7 waiting for user input 01 int 19 00 ready to boot
73 5 regulatory compliance and battery disposal information what this chapter contains 5.1 regulatory compliance..................................................................... 73 5.2 battery disposal information........ ..................................................... 81 5.1 regulatory compliance this section contains the following regulatory compliance information for desktop board dq35mp: ? safety standards ? european union declaration of conformity statement ? product ecology statements ? electromagnetic compatibility (emc) standards ? product certification markings 5.1.1 safety standards desktop board dq35mp complies with the safety standards stated in table 40 when correct ly installed in a compatible host system. table 40. safety regulations standard title ul 60950-1, first edition information technology equipment ? safety - part 1: general requirements (usa and canada) en 60950-1:2006, second edition information technology equipmen t ? safety - part 1: general requirements (european union) iec 60950-1:2005, second edition information technology equipmen t ? safety - part 1: general requirements (international)
intel desktop board dq35mp technical product specification 74 5.1.2 european union declaration of conformity statement we, intel corporation, declare under our sole responsibility that the product intel desktop board dq35mp is in conformity with all applicable essential requirements necessary for ce marking, following the provisions of the european council directive 2004/108/ec (emc directive) and 2006/ 95/ec ( low voltage directive). the product is properly ce marked demo nstrating this conformity and is for distribution within all member states of the eu with no restrictions. this product follows the provisions of the european directives 2004/108/ec and 2006/95/ec. ? e?tina tento vyrobek odpovd po?adavk ? m evropskych sm rnic 2004/108/ec a 2006/95/ec. dansk dette produkt er i overensstemmels e med det europ?iske direktiv 2004/108/ec & 2006/95/ec. dutch dit product is in navolging van de bepalingen van europees directief 2004/108/ec & 2006/95/ec. eesti antud toode vastab euroopa direktiivides 2004/108/ec ja 2006/95/ec kehtestatud n?uetele. suomi t?m? tuote noudattaa eu-direktiivin 2004/108/ec & 2006/95/ec m??r?yksi?. fran?ais ce produit est conforme aux exigen ces de la directive europenne 2004/108/ec & 2006/95/ec. deutsch dieses produkt entspricht den bestimm ungen der europ?ischen richtlinie 2004/108/ec & 2006/95/ec. ??????? ? ? ??? ??????? ?? ????? ?? ?????? ????? 2004/108/ec ? 2006/95/ec. magyar e termk megfelel a 2004/108/ec s 2006/95/ec eurpai irnyelv el ? rsainak. icelandic tessi vara stenst reglugere evrps ka efnahags bandalagsins nmer 2004/108/ec & 2006/95/ec. italiano questo prodotto conforme a lla direttiva europea 2004/108/ec & 2006/95/ec. latvie?u ?is produkts atbilst eiropas direkt vu 2004/108/ec un 2006/95/ec noteikumiem. lietuvi? ?is produktas atitinka europos direktyv ? 2004/108/ec ir 2006/95/ec nuostatas. malti dan il-prodott hu konformi mal-pr ovvedimenti tad-direttivi ewropej 2004/108/ec u 2006/95/ec. norsk dette produktet er i henhold til bestemmelsene i det europeiske direktivet 2004/108/ec & 2006/95/ec. polski niniejszy produkt jest zgodny z postan owieniami dyrektyw unii europejskiej 2004/108/ec i 73/23/ewg. portuguese este produto cumpre com as norm as da diretiva europia 2004/108/ec & 2006/95/ec.
regulatory compliance and battery disposal information 75 espa?ol este producto cumple con las norm as del directivo europeo 2004/108/ec & 2006/95/ec. slovensky tento produkt je v slade s us tanoveniami eurpskych direktv 2004/108/ec a 2006/95/ec. sloven? ? ina izdelek je skladen z dolo ?bami evropskih direktiv 2004/108/ec in 2006/95/ec. svenska denna produkt har tillverkats i enlighet med eg-direktiv 2004/108/ec & 2006/95/ec. trk?e bu rn, avrupa birli ?i?nin 2004/108/ec ve 2006/95/ec y?nergelerine uyar. 5.1.3 product ecology statements the following information is provided to address worldwide product ecology concerns and regulations. 5.1.3.1 disposal considerations this product contains the following material s that may be regulated upon disposal: lead solder on the printed wiring board assembly. 5.1.3.2 recycling considerations as part of its commitment to environmental responsibility, intel has implemented the intel product recycling program to allow retail consumers of intel?s branded products to return used products to selected locations for proper recycling. please consult the http://www.intel.com/intel/other/ehs/product_ecology for the details of this program, including the scope of covered products, available locations, shipping instructions, terms and conditions, etc. ?????????? intel product recycling program ????????????????? ????? http://www.intel.com/intel/other/ehs/product_ecology ????p??????? deutsch als teil von intels engagement fr den um weltschutz hat das unternehmen das intel produkt-recyclingprogramm implementiert, das einzelhandelskunden von intel markenprodukten erm?glicht, gebrauchte produkte an ausgew ?hlte standorte fr ordnungsgem??es recycling zurckzugeben. details zu diesem programm, einschlie? lich der darin eingeschlossenen produkte, verfgbaren standorte, versandanweisungen , bedingungen usw., finden sie auf der http://www.intel.com/intel/other/ehs/product_ecology
intel desktop board dq35mp technical product specification 76 espa?ol como parte de su compromiso de responsabilidad medioambiental, intel ha implantado el programa de reciclaje de productos intel, que permite que los consumidores al detalle de los productos intel devuelvan los productos usados en los lugares seleccionados para su correspondiente reciclado. consulte la http://www.intel.com/intel/other/ehs/product_ecology para ver los detalles del programa, que incluye los productos que abarca, los lugares disponibles, instrucciones de envo, trm inos y condiciones, etc. fran?ais dans le cadre de son engagement pour la protection de l'environnement, intel a mis en ?uvre le programme intel product recy cling program (programme de recyclage des produits intel) pour pe rmettre aux consommateurs de produits intel de recycler les produits uss en les retourna nt des adresses spcifies. visitez la page web http://www.intel.com/intel/other/ehs/product_ecology pour en savoir plus sur ce programme, savoir les produits concerns, les adresses disponibles, les instructions d'expdition, les cond itions gnrales, etc. ?Z ???ho??h???K? ?u???????m??u?? ??k?? u????s????? http://www.intel.com/in tel/other/ehs/product_ecology ?ZE malay sebagai sebahagian daripada komitmennya terhadap ta nggungjawab persekitaran, intel telah melaksanakan program kita r semula produk untuk membenarkan pengguna-pengguna runcit produk jenama intel memulangkan produk terguna ke lokasi-lokasi terpilih untuk dikitarkan semula dengan betul. sila rujuk http://www.intel.com/intel/other/ehs/product_ecology untuk mendapatkan butir-butir program ini, termasuklah skop produk yang dirangkumi, lokasi-lokasi tersedia, arahan penghantaran, terma & syarat, dsb. portuguese como parte deste compromisso com o respei to ao ambiente, a intel implementou o programa de reciclagem de produtos para que os consumidores finais possam enviar produtos intel usados para locais selecionad os, onde esses produtos s?o reciclados de maneira adequada. consulte o site http://www.intel.com/intel/other/ehs/product_ecology (em ingls) para obter os detalhes sobre este programa , inclusive o escopo dos produtos cobertos, os locais disponveis, as instru??es de envio, os termos e condi??es, etc.
regulatory compliance and battery disposal information 77 russian ???? ? ?? ????? ???? ?? , intel ???? ???? ?????? ??? intel (product recycling program) ?? ???????? ???? ?????? ?? ??? intel ????? ???? ????? ??? ??????????? ?? ?? ???? ??????. ???? , ???? ? ?? - ?? http://www.intel.com/intel/other/ehs/product_ecology ? ?????? ???? , ??????? ??? , ??? ???, ???? ??? , ????? ??? . . trk?e intel, ?evre sorumlulu?una ba ? ml l ? n n bir par?as olarak, perakend e tketicilerin intel markal kullan lm ? rnlerini belirlenmi ? merkezlere iade edip uygun ?ekilde geri d?n ? trmesini ama?layan intel rnleri geri d?n ?m program ?n uygulamaya koymu ?tur. bu program n rn kapsam , rn iade merkezleri, nakliye talimatlar , kay tlar ve ?artlar v.s dahil btn ayr nt lar n ?grenmek i?in ltfen http://www.intel.com/intel/other/ehs/product_ecology web sayfas na gidin. 5.1.3.3 lead free desktop board this desktop board is a european union restriction of hazardous substances (eu rohs directive 2002/95/ec) compliant product. eu rohs restricts the use of six materials. one of the six re stricted materials is lead. this desktop board is lead free although certain discrete components used on the board contain a small amount of lead whic h is necessary for component performance and/or reliability. this desktop board is referred to as ?lead-free second level interconnect.? the board substrate and the solder connections from the board to the components (second-level connections) are all lead free. china bans the same substances and has the same limits as eu rohs; however it requires different product marking and contro lled substance information. the required mark shows the environmental friendly usage period (efup). the efup is defined as the number of years for which controlled listed substances will not leak or chemically deteriorate while in the product. table 41 shows the various forms of the ?lead-free 2 nd level interconnect? mark as it appears on the board and accompanying collateral.
intel desktop board dq35mp technical product specification 78 table 41. lead-free board markings description mark lead-free 2 nd level interconnect: this symbol is used to identify electrical and electronic assemblies and components in which the lead (pb) concentration level in the desktop board substrate and the solder connections from the board to the components (second-level interconnect) is not greater than 0.1% by weight (1000 ppm). or or
regulatory compliance and battery disposal information 79 5.1.4 emc regulations desktop board dq35mp complies with the emc regulations stated in table 42 when correct ly installed in a compatible host system. table 42. emc regulations regulation title fcc 47 cfr part 15, subpart b title 47 of the code of federal regu lations, part 15, subpart b, radio frequency devices. (usa) ices-003 issue 4 (class b) interference-causing equipment standard, digital apparatus. (canada) en55022: 2006 (class b) limits and methods of measurement of radio interference characteristics of information technology equi pment. (european union) en55024:1998 information technology equipment ? immunity characteristics limits and methods of measurement. (european union) en55022:2006 (class b) australian communications authority, standard for electromagnetic compatibility. (australia and new zealand) cispr 222005 +a1:2005 +a2:2006 (class b) limits and methods of measurement of radio disturbance characteristics of information technology equi pment. (international) cispr 24: 1997 +a1:2001 +a2:2002 information technology equipment ? i mmunity characteristics ? limits and methods of measurement. (international) vcci v-3/2007.04, v-4/2007.04, class b voluntary control for interference by information technology equipment. (japan) japanese kanji statement translation: this is a class b product based on the standard of the voluntary control council for inte rference from information technology equipment (vcci). if this is used near a radio or television receiver in a domestic environment, it may cause radio interf erence. install and use the equipment according to the instruction manual.
intel desktop board dq35mp technical product specification 80 korean class b statement translation: this is household equipment that is certified to comply with emc requirements. you may use this equipment in residential environments and other non-residential environments. 5.1.5 product certification markings (board level) desktop board dq35mp has the product certification markings shown in table 43: table 43. product certification markings description mark ul joint us/canada recognized component mark. includes adjacent ul file number for intel desktop boards: e210882. fcc declaration of conformi ty logo mark for class b equipment. includes intel name and dq35mp model designation. ce mark. declaring compliance to european union (eu) emc directive and low voltage directive. australian communications authority (aca ) c-tick mark. includes adjacent intel supplier code number, n-232. japan vcci (voluntary control council for interference) mark. s. korea mic (ministry of information and communication) mark. includes adjacent mic certification number: cpu-dq35mp (b) taiwan bsmi (bureau of standards, metrology and inspections) mark. includes adjacent intel company number, d33025. printed wiring board manufacturer?s reco gnition mark. consists of a unique ul recognized manufacturer?s logo, along with a flammability rating (solder side). v-0 china rohs/environmentally friendly use period logo: this is an example of the symbol used on in tel desktop boards and associated collateral. the color of the mark may vary depending upon the application. the environmental friendly usage period (efup) for intel desktop boards has been determined to be 10 years.
regulatory compliance and battery disposal information 81 5.2 battery disposal information caution risk of explosion if the battery is replaced with an incorrect type. batteries should be recycled where possible. disposal of used batteries must be in accordance with local environmental regulations. precaution risque d'explosion si la pile usage est remp lace par une pile de type incorrect. les piles usages doivent tre recycles dans la mesure du possible. la mise au rebut des piles usages doit respecter les rglementa tions locales en vigueur en matire de protection de l'environnement. forholdsregel eksplosionsfare, hvis batteriet erstattes med et batteri af en forkert type. batterier b?r om muligt genbruges. bortskaffels e af brugte batterier b?r foreg? i overensstemmelse med g?ldende milj?lovgivning. obs! det kan oppst? eksplosjonsfare hvis batteriet skiftes ut med feil type . brukte batterier b?r kastes i henhold til gjeldende milj?lovgivning. viktigt! risk f?r explosion om batteriet ers?tts med felaktig batterityp. batterier ska kasseras enligt de lokala milj ?v?rdsbest?mmelserna. varo r?j?hdysvaara, jos pariston tyyppi on v??r?. paristot on kierr?tett?v?, jos se on mahdollista. k?ytetyt paristot on h?vi tett?v? paikallisten ymp?rist?m??r?ysten mukaisesti. vorsicht bei falschem einsetzen einer neuen batteri e besteht explosionsgefahr. die batterie darf nur durch denselben oder einen en tsprechenden, vom hersteller empfohlenen batterietyp ersetzt werden. entsorgen si e verbrauchte batterien den anweisungen des herstellers entsprechend. avvertimento esiste il pericolo di un esplos ione se la pila non viene so stituita in modo corretto. utilizzare solo pile uguali o di tipo equivalente a quelle co nsigliate dal produttore. per disfarsi delle pile usate, seguir e le istruzioni del produttore.
intel desktop board dq35mp technical product specification 82 precaucin existe peligro de explosin si la pila no se cambia de forma adecuada. utilice solamente pilas iguales o del mismo tipo qu e las recomendadas por el fabricante del equipo. para deshacerse de las pilas usad as, siga igualmente las instrucciones del fabricante. waarschuwing er bestaat ontploffingsgevaar als de batteri j wordt vervangen door een onjuist type batterij. batterijen moeten zoveel moge lijk worden gerecycled. houd u bij het weggooien van gebruikte batterijen aan de plaatselijke milieuwetgeving. aten??o haver risco de explos?o se a bateria for su bstituda por um tipo de bateria incorreto. as baterias devem ser recicladas nos locais apropriados. a elimina??o de baterias usadas deve ser feita de acordo com as regulamenta??es ambientais da regi?o. a ? ciaro?zna ?? ?? ?? ?? , ??? ??????? ????? ???????? . ????? ???? , ?????? , ?????? . ????? ? ? ?????? ??? ???? ?? ?????????? ????? . upozornn v p ? pad vym ny baterie za nesprvny druh m ? ?e dojt k vybuchu. je-li to mo?n, baterie by m ly byt recyklovny. baterie je t ? eba zlikvidovat v souladu s mstnmi p? edpisy o ?ivotnm prost ? ed. ????? ????? ?????? ?? ???? ? ????? ? ??? ????????? ? ? ??????? ??. ? ???? ? ?? ? ????????? ?? ?? ???? ?? ???? . ????? ?? ????????????? ???? ?? ? ???? ????? ? ??? ?? ? ???|????????? ????????? . vigyazat ha a telepet nem a megfelel ? tpus telepre cserli, az felrobbanhat. a telepeket lehet ? sg szerint jra kell hasznos tani. a hasznlt telepeke t a helyi k?rnyezetvdelmi el ? rsoknak megfelel ? en kell kiselejtezni.
regulatory compliance and battery disposal information 83 awas risiko letupan wujud jika bateri digantikan dengan jenis yang tidak betul. bateri sepatutnya dikitar semula jika boleh. pelupusan bateri terpakai mestilah mematuhi peraturan alam sekitar tempatan. ostrze ? enie istnieje niebezpiecze stwo wybuchu w przypadku zastosowania niew ? a ?ciwego typu baterii. zu? yte baterie nale ? y w miar ? mo ? liwo ?ci utylizowa ? zgodnie z odpowiednimi przepisami ochrony ?rodowiska. precau ? ie risc de explozie, dac ? bateria este ?nlocuit ? cu un tip de baterie necorespunz ? tor. bateriile trebuie reciclate, dac ? este posibil. depozitare a bateriilor uzate trebuie s ? respecte reglement ? rile locale privind protec ? ia mediului. ??????? ??????? ???? ??????? ? ??? ? ? ???. ???? ???? ? ???????? ????? . ?????? ???? ???? ??? ????? , ???? ??? ?????? . upozornenie ak batriu vymente za nesp rvny typ, hroz nebezpe ?enstvo jej vybuchu. batrie by sa mali pod ? a mo?nosti v?dy recyklova ? . likvidcia pou?itych batri sa mus vykonva ? v slade s miestnymi predpismi na ochranu ?ivotnho prostredia. pozor zamenjava baterije z baterijo druga ?nega tipa lahko povzro ?i eksplozijo. ? e je mogo ?e, baterije reciklirajte. rabljene ba terije zavrzite v skladu z lokalnimi okoljevarstvenimi predpisi. . uyari yanl ? trde pil tak ld ? nda patlama riski vard r. piller mmkn oldu? unda geri d?n ?trlmelidir. kullan lm ? piller, yerel ?evre yasalar na uygun olarak at lmal d r. o ? ?????? ???? ?????? ? , ???? ?????? ??? ???. ? ????? , ?????? ???? ? ?????. ????? ??????? ???? ?? ? ?????? ???? ???? ? , ??? ? ????? .
intel desktop board dq35mp technical product specification 84

▲Up To Search▲

Price & Availability of D96938-001US

	To Download D96938-001US Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .